There are several D-Link extender types, both wired and wireless. I recommend you review each D-Link extension model before buying one. Once you have purchased the extender, it is time to set it up so that you can enjoy extended wifi signals in all corners of your house. Let's take a look at the WPS button, which allows you to configure one of the extender models. If your extender is wired, connect all wires to it. If wireless, plug the extender into an electric socket. The led lights should blink to indicate that the extender has been turned on. Next, press the WPS button on both the router and extender simultaneously for 20 seconds. The extender should blink green to indicate that the configuration was successful. Setup an extender using the dlinkap.local protocol.

Do you want to upgrade dlinkap.local firmware These simple steps will help you quickly and efficiently update dlinkap.local firmware.

Go to D-Link's official site and enter your extender model # in the search field.

Download the firmware update for your extender model.

You can save the file to your system (usually on your desktop).

You can visit the dlink extension login page by entering http://dlinkap.local at the address bar.

If the dlinkap.local is not working error occurs then please go to the http://192.168.0.50 setup page.

After logging in, hit Administration tab and click "Firmware Updating"

You can now locate the downloaded firmware file using the browse button.

Now upload the file to your computer and update the dlink extension firmware

Process.